Menu

Uncategorized

Push Type Internal Tube Cutter – ATP Series

SUBZERO make ATP series tube cutters are designed to cut walls of tubes internally.

Features:

  • Quick method of cutting ferrous or non-ferrous tubes.
  • Tool can be used with standard Electric or Pneumatic drive.
  • Two piece body and mandrel construction allow for quick and easy tool replacement.

Operation

  • Connect the tool to drive.
  • Insert the tool in to the tube.
  • Start the drive & apply inward pressure.
  • Tube will cut in few seconds.

Specifications

Tube O.D. Tube Gauge (BWD) Tube Cutter Model No. Spare Cutting Bit Model No. Size
5/8″ 14-22 ATP-625 ATP-625-SB 3/8″
3/4″ 14-22 ATP-750 ATP-750-SB
7/8″ 14-22 ATP-875 ATP-875-SB
1″ 12-22 ATP-1000 ATP-1000-SB
1.1/4″ 12-22 ATP-1250 ATP-1250-SB 1/2″
1.1/2″ 12-22 ATP-1500 ATP-1500-SB

Standard adjustable reach is 4″(101.6mm) and they are available in optional increments of 2″(50.8mm).

“A” reach= 6″(152.4mm). “B” reach= 8″(203.2mm). “C” reach= 10″(254.0mm).

Recommended Drive

Model Tube Size Chuck Size Weight (Kg)
Drive-3 5/8″ – 1″ 3/8″ 8.5
Drive – 5 1.1/4″ – 1.1/2″ 1/2″ 7.5

Download PDF

One Revolution Internal Tube Cutter – OTC Series

These tool is designed for hand operation using ratchet or hand wrench for cutting ferrous and non-ferrous tubes. The cutter bit operates on an eccentric principle with the cutter bit in the closed position insert the cutter in to the tube to be cut. Apply wrench and turn in a clockwise direction. The tool bit will move out and pierce the tube wall. Continued turning and cut the tube off in one revolution. The cutter is then turned counterclockwise slightly to close the bit allowing the cutter to be removed from the tube.

Standard cutter available with 6 inch reach extra long cutter available on request.

Specifications

Tube O.D.Tube GaugeTube I.D.Cutter Model No.Spare Bit Model No.
mminchBWGmminch  
15.875/8″14
15-16
17-18
19-20
22		11.4-11.9
12.0-12.9
12.7-13.5
13.5-14.2
14.0-14.7		.450-.470
.472-.510
.500-.531
.531-.560
.550-.580		OTC-625-14
OTC-625-16
OTC-625-18
OTC-625-20
OTC-625-22		OTC-625-SB
19.053/414-15
16
17-18
19-20		14.7-15.5
15.2-16.0
15.9-16.5
16.7-17.5		.580-.610
.600-.630
.625-.650
.660-.690		OTC-750-14
OTC-750-16
OTC-750-18
OTC-750-20		OTC-750-SB
22.227/814-15
16-17
18
19-20		17.8-18.5
18.8-19.5
19.3-20.0
19.8-20.6		.700-.730
.740-.770
.760-.790
.780-.810		OTC-875-14
OTC-875-16
OTC-875-18
OTC-875-20		OTC-875-SB
25.401″14
15
16-17
18-20
22		20.8-21.6
21.3-22.1
22.8-22.6
22.6-23.1
23.9-24.6		.820-.850
.840-.870
.860-.890
.890-.910
.940-.970		OTC-1000-14
OTC-1000-15
OTC-1000-16
OTC-1000-18
OTC-1000-22		OTC-1000-SB

Download PDF

Manual Tube Puller

Ideally suitable for small maintenance job. Manual tube puller allows easy removal off stubs and tubes. Can be use with impact wrench in combination with drive socket.

Specifications

Tube SizeTube Puller Model NumberSpare Spear Model Number
O.D.BWGWall ThicknessI.D.
mminch mminchmminch  
6.351/4181.240.493.86.152MTP-25-18MPS-25-18
9.523/8161.650.656.22.245MTP-38-16MPS-38-16
9.523/8181.240.497.04.277MTP-38-18MPS-38-18
9.523/8200.880.357.75.305MTP-38-20MPS-38-20

Download PDF

Internal Tube Cutter – PR68 Series

Features:

  • PR-68 tube cutters are ideal for cutting thick walled boiler tubes.
  • The Internal Tube Cutter PR-68 is driven via the square in a clockwise direction using either an electric, pneumatic or hydraulic driving machine.
  • cutters are available in standard reach of 4″ (100mm). Additional reaches in increments of 4″ are available up to 16″ (400mm).

Specifications

Size Tools Model Number Spare Bit Model Number Tube I.D. Range Max. Tube O.D . Body Daimeter Drive Square male
mm Inch mm Inch mm Inch
195 0681951 1681951 20-25 .787-.984 34 1.339 19.5 .768 1/2″
245 0682451 1682451 25-30 .984-1.181 38 1.496 24.5 .965
290 0682901   30-35 1.181-1.378 43 1.693 29 1.142
330 0683301 1682901 35-40 1.378-1.575 48 1.890 33 1.299
380 0683801   40-50 1.575-1.969 58 2.126 38 1.496
480 0684801   50-60 1.969-2.362 68 2.677 48 1.890 3/4″
530 0685301 1684801 55-65 2.165-2.559 73 2.874 53 2.087
630 0686301   65-75 2.559-2.953 83 3.268 63 2.480
730 0687301   75-85 2.953-3.346 93 3.661 73 2.874
830 0688301 1687301 85-95 3.346-3.740 103 4.055 83 3.268
930 0689301   95-105 3.740-4.134 113 4.449 93

3.661

Download PDF

Tube Sheet Hole Brush

Features:

  • To clean tube sheet bores, prior to tube installation.
  • Can be used with any standard pneumatic or electric drill.
  • Available in Carbon Steel, Stainless Steel and Brass.

Specifications

Tube O. D. Model No.
mm Inch
12.70 1/2 TSHB-1/2
15.87 5/8 TSHB-5/8
19.05 3/4 TSHB-3/4
22.22 7/8 TSHB-7/8
25.40 1 TSHB-1
31.75 1.1/4 TSHB-1.1/4
38.10 1.1/2 TSHB-1.1/2
44.45 1.3/4 TSHB-1.3/4
50.80 2 TSHB-2
57.15 2.1/4 TSHB-2.1/4
63.50 2.1/2 TSHB-2.1/2
69.85 2.3/4 TSHB-2.3/4
76.20 3 TSHB-3

Download PDF

Tube Leak Detector

Features:

The vacuum leak tester SVLD-3000 is a very quick, easy & precise method of testing damage or leaky tubes of boilers, condensers, & heat exchangers. Also it is very economical & fast method compare to hydro test for locating

Tube Capacity1/4″ (6.3mm) To 3″ (76.2mm)
Air Pressure required90 psi (6.0 Bar)
Max Vacuum80%
Temperature range-20 to 80 C
Weight0.800 gms
Dimensions230 X 120 X 170 (MM)

Specifications

Model (SEALS)Model (NOZZLE HANDLE SIDE)Model (NOZZLE HANDLE SIDE)Tube Size
P-750NH-750NG-7501/4″(6.3mm)-¾” (19.05 mm)
P-1250NH-1250NG-12505/8″(15.9mm)-1.1/4″ (31.7mm)
P-2000NH-2000NG-20001.1/8″ (28.6mm) -2″ (50.8 mm)
P-3000NH-3000NG-30001.7/8″ (47.6mm)-3″ (76.2 mm)

Download PDF

Tube Guide

Features:

To ‘pilot’ the tubes through the tube sheets and baffle plates during tube insertion.

Specifications

Tube O. D. Tube Thk. Bwg. Model No.
mm Inch
12.70 1/2 16-18
19-20
21-23		 PGT-1
PTG-2
PTG-2.5
15.87 5/8 12-13
14-16
17-20
22-24		 PTG-3
PTG-4 PTG-5
PTG-5.5
19.05 3/4 10-12
13-16
17-20
22-24		 PTG-6
PTG-7
PTG-8
PTG-8.5
22.22 7/8 10-12
13-16
17-20
21-22		 PTG-9 PTG-10
PTG-11
PTG-11.5
25.40 1 8-9
10-12
13-16
17-20
21-23		 PTG-12.5
PTG-12
PTG-13
PTG-14
PTG-14.5
31.75 1.1/4 10-13
14-20		 PTG-15
PTG-16
34.92 1.3/8 8-9
10-13
14-20		 PTG-17
PTG-18
PTG-19
38.10 1.1/2 8-9
10-13
14-20		 PTG-20
PTG-21
PTG-22
50.80 2 8-10
11-13
14-18		 PTG-23
PTG-24
PTG-25
63.50 2.1/2 10-13
14-18		 PTG-26
PTG-27

Download PDF

TEF Series Tube End Facer

Features:

  • Ideal for quick facing of projecting tube ends in heat exchangers, condensers and boilers.
  • One size of tool is suitable for use on multiple tube thicknesses by interchanging pilot.
  • (TEF-375 is the exception with the tool suitable for one tube ID only).
  • Each tool is supplied with a set of multiple pilots to cover all tube thicknesses.
  • Tube end facers for MM sizes of tubes also available.

Specifications

Tube O. D.Tool Thk. bwgModel No.Spare Tool Bits
mmInch  Non-Ferrous or Carbon Steel Tubes Model No.Stainless Steel Tubes Model No.
9.533/816-22TEF-375TEF-376TEF-376 SS
12.701/215-20TEF-500TEF-506TEF-506 SS
15.875/814-18TEF-625TEF-626TEF-626 SS
19.053/410-18TEF-750TEF-756TEF-756 SS
22.227/813-18TEF-875TEF-876TEF-876 SS
25.40111-18TEF-1000TEF-1006TEF-1006 SS

Download PDF

ST Series Grooving Tool

  • High production tool
  • Ideal for use where 1 tool is needed per bore
  • Tool is ideally suited for CNC applications on account of one piece mandrel construction and short design.

Specifications

Tube O. D.Tool Model No.Spare Tool Bits
mmInch 1/8 X 3/8 X 1/8
Spacing		1/8 X 1/4 X 1/8
Spacing		Special
Spacing.
9.533/8ST-375-970ST-3703ST-3703-SST-3703-SP
12.701/2ST-500-1270ST-5003ST-5003-SST-5003-SP
15.875/8ST-625-1588ST-6203ST-6203-SST-6203-SP
19.053/4ST-750-1900ST-7503ST-7503-SST-7503-SP
22.227/8ST-875-2220ST-7503ST-7503-SST-7503-SP
25.401ST-1000-2540ST-7503ST-7503-SST-7503-SP
28.571.1/8ST-1125-2553ST-7503ST-7503-SST-7503-SP
31.751.1/4ST-1250-3175ST-7503ST-7503-SST-7503-SP
34.921.3/8ST-1375-3493ST-7503ST-7503-SST-7503-SP
38.101.1/2ST-1500-3810ST-7503ST-7503-SST-7503-SP
41.271.5/8ST-1625-4128ST-7503ST-7503-SST-7503-SP
44.451.3/4ST-1750-4445ST-7503ST-7503-SST-7503-SP
47.621.7/8ST-1875-4763ST-7503ST-7503-SST-7503-SP
50.802ST-2000-5080ST-7503ST-7503-SST-7503-SP
57.152.1/4ST-2250-5715ST-7503ST-7503-SST-7503-SP
63.502.1/2ST-2500-6350ST-7503ST-7503-SST-7503-SP

SGT Series Grooving Tool

Features:

  • Only light pressure required to cut precision grooves inside holes or cylinders.
  • Location and depth of groove easy to adjust.
  • Simple to change cutter for different groove shapes.
  • Changing of bushing and cutter allow one tool to cover a range of hole diameters.
  • The life of the cutter extendable by re sharpening.

Specifications

Tube O. D.Tool Model No.Pilot Nose / Bushing Model No.Tool Bits Model No.
mmInch
10-130.40-0.51SGT -102SGT-102-PNSGT-102-TB
12.7 -160.50 -0.63SGT-122SGT-122-PNSGT-122-TB
16 -200.63 -0.79SGT-162SGT-162-PNSGT-162-TB
19 -320.75 -1.26SGT-193SGT-193-PNSGT-193-TB
30-521.18-2.05SGT-303SGT-303-PNSGT-303-TB
50 -781.97 -3.07SGT-504SGT-504-PNSGT-504-TB

Download PDF

Load More